ブログに戻る
ハウツーガイド 2026-11-17 Welcome to Monster Fight Club! 0 ビュー

Combat Zone Downsizers Arasaka: Assembly and Painting Tips

Combat Zone Downsizers Arasaka: Assembly and Painting Tips

A practical walkthrough for prepping, assembling and painting the five Arasaka Downsizers miniatures, plus how to use the ten included cards on the table.

What the Downsizers box gives you to work with

The Combat Zone: Downsizers (Arasaka) box is a self-contained expansion for an Arasaka gang. Inside you get five Arasaka miniatures and ten Arasaka character cards. That is the full confirmed contents list, so plan your build around those five models and the cards that support them.

Because the box does not include assembly instructions, bases, or a hobby toolset in the supplied information, treat this as a prep-and-paint guide rather than a step-by-step unboxing. The order below is a practical sequence you can adapt once you see the actual components.

Confirmed contents at a glance

  • Combat Zone: Downsizers (Arasaka): 5 Arasaka Miniatures Five models is a manageable batch for a single painting session, but it is enough that you will want a repeatable process rather than treating each figure as a one-off project.
    Combat Zone: Downsizers (Arasaka)
    Combat Zone: Downsizers (Arasaka)
  • Combat Zone: Downsizers (Arasaka): 10 Arasaka Character Cards The cards are part of the product, not an afterthought. Keep them with the miniatures so you can match each model to its card during assembly and painting.

A sensible order for prepping and assembling the five models

The exact components are not detailed in the supplied listing, so use this as a general workflow and adjust to what is actually in the box.

  1. Sort the miniatures and cards together: Lay out the five miniatures next to the ten character cards. Match any obvious visual cues so you know which model corresponds to which card before you start cleaning or gluing.
  2. Clean mould lines and flash: Inspect each miniature for mould lines and excess material. A hobby knife and fine sandpaper handle most cleanup. Work over a tray so small parts do not disappear.
  3. Dry-fit before gluing: Test-fit any separate parts before applying adhesive. If a join needs filling, do that after the glue has cured.
  4. Attach to bases and let cure: Mount each model on its base once the main assembly is stable. Give the adhesive full curing time before painting or handling roughly.
  5. Prime in thin coats: A thin, even primer coat gives paint something to grip. Avoid heavy coats that obscure detail on small faces and equipment.

Painting Arasaka miniatures to read at table distance

Arasaka models in Combat Zone tend to carry corporate or cyber-enhanced visual cues, but the supplied listing does not specify a colour scheme. That means you have room to choose a palette that matches your existing gang. Pick two or three main colours, one accent, and a neutral for weapons and equipment.

Work in batches: paint all five models' main colours first, then the accents, then the details. This keeps your palette consistent and saves time compared with finishing one model completely before starting the next. For faces and small details, use a fine brush and keep the paint thin enough to flow without pooling.

Miniature prep tips that save time later

  • Keep the cards visible while you paint: The ten character cards are a useful reference for matching a model's role to its paint scheme. If a card suggests a particular weapon or gear, you can highlight that detail during painting.
  • Paint in sub-assemblies if a pose is crowded: If a miniature has arms or weapons crossing the body, painting those parts separately before final assembly can make detail work easier. This is optional and depends on the actual components.
  • Use a wet palette for batch painting: Five models at once will dry out paint on a standard palette. A wet palette keeps your main colours workable across the whole batch.

Getting the Downsizers onto the table

The box is designed to add to your Arasaka gang in the Combat Zone, so the five miniatures and ten cards are meant to be used together. Once assembled and painted, sort the cards into the ones you plan to use for your first game and keep the rest with the models for reference. The supplied information does not include gameplay rules or card text, so check your Combat Zone rulebook for how the cards are used.

Value and what the listing does not confirm

  • Combat Zone: Downsizers (Arasaka): Catalog price USD 22.75 (comparison price USD 35.00) At five miniatures and ten cards, this is a low-cost way to expand an Arasaka gang, but check the current price at checkout since catalog prices can change.

What to check before you start

The supplied record does not list assembly instructions, base sizes, or material details. That is not a problem for an experienced hobbyist, but if you are new to miniatures, plan to dry-fit parts and test your glue on a small area first. The five models and ten cards are confirmed; everything else in your build will depend on what you find in the box.

関連記事

Customer Service
ホーム
商品
カート
マイページ