Barghest Painting Guide for The Witcher Specters 2

By Welcome to Monster Fight Club! | Published: 2026-10-30

Category: How-to Guides

Learn to paint The Witcher Specters 2 Barghests with a step-by-step guide covering ghostly fur, glowing eyes, and spectral bases.

Quick Answer

To paint Barghests from The Witcher Specters 2, focus on creating a ghostly, ethereal look using layering, dry brushing, and glazes. Start with a dark undercoat, build up pale highlights, and finish with glowing eyes and a spectral base.

Why Ghostly Fur Works for Barghests

Barghests are spectral hounds that hunt in vicious packs, often drawn to vile or tragic events. Their phantom nature calls for a palette that feels otherworldly—pale blues, greens, or purples over a dark base read as supernatural rather than natural.

The key is contrast: keep shadows deep and highlights sharp. This mimics the way spectral creatures seem to fade in and out of visibility.

Choosing the Right Palette

For a classic ghostly look, use a cold palette: dark blue-gray shadows, mid-tone icy blue, and pale green or white highlights. Add a warm accent like fiery orange or yellow for the eyes to draw attention.

Avoid warm browns or tans—they make the hound look like a normal dog. Stick to cool, desaturated tones to sell the spectral effect.

Step-by-Step Barghest Painting Process

Prime with a Dark Undercoat: Spray or brush on a dark primer—black or dark gray works best. This provides the deep shadows that make the ghostly highlights pop. Check that the primer is fully dry and covers all recesses; missed spots will show as distracting bare plastic.
Basecoat the Body in a Cool Mid-Tone: Use a mix of dark blue and gray to paint the entire body. This establishes the base color for the spectral fur. Thin your paint to a smooth consistency; thick layers can obscure fine details like the phantom fangs.
Build Up Layers with Dry Brushing: Dry brush a lighter blue or pale green over the raised areas—muscles, head, and back. Repeat with progressively lighter shades to create a fading, ethereal effect. Wipe most of the paint off the brush before applying; too much paint will leave streaks instead of a soft glow.
Paint the Eyes with a Glowing Accent: Use a bright orange or yellow for the eyes. Apply a white dot in the center and a thin glaze around the sockets to simulate a supernatural glow. Keep the eyes as the brightest point on the model; if they look dull, the spectral effect loses its punch.
Add Spectral Details: Use a fine brush to add pale highlights to the fangs and claws. Consider a subtle green or blue wash in the mouth area to enhance the phantom look. Don't overdo the highlights—spectral creatures should look faint, not solid.
Finish with a Spectral Base: Paint the plastic base with a dark color, then add a few tufts of grass or a light dry brush of pale blue to suggest a haunted ground. Seal with a matte varnish. Ensure the varnish is fully cured before handling; a tacky surface can attract dust and ruin the finish.

Product Spotlight

The Witcher - Specters 2: Barghests: The Witcher - Specters 2: Barghests are made from durable plastic and include plastic bases. Durable plastic means the models are easy to clean, assemble, and paint without worrying about warping or breakage during handling.
The Witcher - Specters 2: Barghests